Epson POWERLITE 83V+, User Manual, Page: 60 / 106

60
Fine-tuning the Projector
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
1. Press the
Menu
button.
2. Select the
Info
menu. You see one of the following menus:
■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 3000 hours in
High
brightness mode to about 4000 hours in
Low
brightness
mode. If the number shown is close to 3000 or the
information is displayed in red, make sure you have a spare
lamp handy.
■
Source
Displays the input source currently being projected.
■
Input Signal
(computer, RGB video, and component video)
Displays the input signal setting.
■
Resolution
(computer, RGB video, and component video)
Displays the input resolution.
■
Video Signal
(composite and S-Video)
Displays the video signal format.
note
You can make changes to
many of the signal settings
on the Signal menu. See
page 54 for details.
Computer (analog RGB, digital RGB, RGB
Video/Component video)
Video (Composite video, S-Video)
note
The lamp usage timer
doesn’t register until you’ve
used the lamp for at least
10 hours.