Epson PowerLite 735c, User Manual

Page: 18 / 144

12
Displaying and Adjusting the Image
The control panel and the remote control let you select the source as
follows:
■
On the projector’s control panel, the
Source
button switches
between equipment connected to the Video, S-Video, and
Computer/Component Video ports, or to EasyMP (for wireless
network and memory card presentations).
■
On the remote control, the
Comp/EasyMP
button lets you
switch to a directly connected computer; pressing it again switches
to EasyMP. The
S-Video/Video
button switches to your
connected video source (pressing it repeatedly switches between
equipment connected to the Video and S-Video ports).
To select component video, see page 13.
Starting EasyMP
If you want to start EasyMP, follow these steps:
1. First select EasyMP as the source by pressing the
Source
button
on the projector or the
Comp/EasyMP
button on the remote
control.
2. Insert either the EPSON 802.11b card (for wireless presentations)
or a memory card (for computer-free presentations) into the card
slot shown on page 13. If you do not insert a card, you see a
screen like this, prompting you to do so:
3. For detailed instructions on running your EasyMP presentation,
see Chapter 3 if you’re presenting wirelessly or Chapter 5 if using
the memory card.
note
Only the EPSON 802.11b
network card is guaranteed
to work. Other brands may
not be compatible.
See page 62 for compatible
memory cards.