1 • Setting Up the Projector
26
Connecting to a PC Laptop Computer
To connect the projector to your PC laptop computer, you need to:
●
Connect the projector video cable
●
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link III software)
●
Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note:
Laptop configurations vary. See your computer manual for the
location of the ports needed to connect your projector.
Connecting the Video Cable
First connect the projector’s video cable to your laptop.
1. Connect one end of the projector video cable to the projector’s
Computer 1
port. (Use the
Computer 2
port if you are
connecting a second computer.)
projector video cable
Computer 1 port
5300.book Page 26 Tuesday, April 13, 1999 4:19 PM
