Connecting to a Computer
31
Connecting to a Desktop Macintosh
To connect the projector to your desktop Macintosh, you need to:
●
Connect the projector video cable and computer monitor cable
●
Connect the mouse and/or serial cable (if you want to use the
remote control as a mouse or use the ELP Link III software)
●
Connect the audio cable (if you’ll be projecting with audio)
Follow the steps in each section for the cables you need to connect.
Before beginning, turn off the projector and computer if they are on.
Note:
Macintosh configurations vary. See your computer manual for the
location of the ports needed to connect your projector.
5300.book Page 31 Tuesday, April 13, 1999 4:19 PM
