Epson PowerLite 450W, User Manual

Page: 37 / 174

Presenting With the Remote Control
37
4. Press
Enter
to select the pattern you want, then press
Esc
.
5. Choose
Pattern Display
to display the pattern.
6. Press
Esc
when you’re finished displaying the pattern.
Assigning a Pattern to the User Button
You can assign any of the available patterns to the
User
button on the
remote control, and then display it by simply pressing the
User
button.
1. In the Settings menu, select the
Pattern Type
as described on
page 36.
2. Highlight
User Button
and press
Enter
.
3. Highlight
Pattern Display
and press
Enter
.
4. Press
Menu
to exit.
Creating Your Own Pattern
You can transfer any image from your computer or video source to the
projector and then use it as a pattern. If you assign it to the
User
button as described above, you can display it any time you want by
simply pressing the
User
button on the remote control.
Start by displaying the image you want to use from a computer or
other source. Then follow these steps to capture the image and transfer
it to the projector:
1. In the Settings menu, highlight
Pattern
and press
Enter
.
2. Select
User Pattern
and press
Enter
.
3. When you see a message asking if you want to use the current
image as the pattern, select
Yes
and press
Enter
.
4. Press
Enter
again.
5. When you see a confirmation message, select
Yes
and press
Enter
. Saving the image may take a few moments. Do not use
your projector, remote control, or video source while the logo is
being saved.
note
When you choose an image
for the user pattern, it erases
any previously used image.