Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports.
If you are projecting video using a
Computer
port, connect the projector to the video source using an
optional stereo mini-jack audio cable.
If you are projecting video using the
Video
or
S-Video
port, connect the projector to the video source
using an RCA audio cable.
1.
Connect the audio cable to your video source's audio-out ports.
2.
Do one of the following:
• Connect the other end of the cable to the projector's
Audio
port that corresponds to the
Computer
port you are using for video.
• Connect the red and white plugs on the other end of the cable to the projector's
L-Audio-R
ports.
1
Audio1
or
Audio2
port
2
L-Audio-R
ports
Parent topic:
Connecting to an External Computer Monitor
If you connected the projector to a computer using a
Computer
port, you can also connect an external
monitor to the projector. This lets you see your presentation on the external monitor even when the
projected image is not visible.
Note:
Monitors that use a refresh rate less than 60 MHz may not be able to display images correctly.
37
