Parent topic:
Connecting to External USB Devices
Related topics
Connecting a USB Device or Camera to the Projector
You can connect your USB device or camera to the projector's USB Type A port and use it to project a
slide show or presentation.
1.
If your USB device came with a power adapter, plug the device into an electrical outlet.
2.
Connect the USB cable (or USB flash drive or USB memory card reader) into the projector's USB
TypeA
port shown below.
1
USB
TypeA
port
Note:
Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not
operate correctly.
3.
Connect the other end of the cable (if applicable) to your device.
Parent topic:
Connecting to External USB Devices
Related topics
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to a USB Type A port.
1.
Make sure the connected USB source is turned on, if necessary.
40
Summary of Contents for PowerLite 1750
