Epson PowerLite 1716, User Manual

Page: 137 / 157

Solving Problems
137
■
If the projector ID has been set, you may need to change the
projector or remote control ID. See page 36.
■
If any buttons are held for longer than 30 seconds, the remote
enters sleep mode. Release any button that is held to wake the
remote.
■
If you’re using the remote control as a wireless mouse, make sure
the
USB Type B
setting in the Extended menu is set to
Link 21L
(see page 112).
Where To Get Help
Epson provides these technical support services:
Internet Support
Visit Epson’s support website at www.epson.com/support and select
your product for solutions to common problems. You can download
utilities and documentation, get FAQs and troubleshooting advice, or
e-mail Epson with your questions.
Speak to a Support Representative
To use the Epson PrivateLine Support service, call (800) 637-7661
and enter the PIN on the included Epson PrivateLine Support card.
This is the fastest way of speaking to a live representative, and it’s free.
This service is available 6
AM
to 6
PM
, Pacific Time, Monday through
Friday, for the duration of your warranty period.
You may also speak with a projector support specialist by dialing one
of these numbers:
■ U.S.: (562) 276-4394, 6
AM
to 6
PM
, Pacific Time, Monday
through Friday.
■ Canada: (905) 709-3839, 6
AM
to 6
PM
, Pacific Time, Monday
through Friday.
Days and hours of support are subject to change without notice. Toll
or long distance charges may apply.