130
Solving Problems
The message
Not Supported
is displayed.
■
Make sure the correct
Input Signal
is selected in the Signal menu
(see page 103).
■
Make sure your computer’s resolution doesn’t exceed UXGA
(1600
×
1200) and the frequency or refresh rate is supported by
the projector (see page 144). If necessary, change your computer’s
resolution setting.
Only part of the image is displayed.
■
Press the
Aspect
button on the remote control to select a
different setting (see page 32).
■
If projecting from a computer, press the
Auto
button on the
remote control. Also make sure the image
Position
setting is
correct in the Signal menu (see page 103).
■
Check the projector’s
Resolution
setting (see page 103). Select
Normal
or
Wide
, depending on the size of your computer’s
display panel.
■
Make sure your computer is not set to display an extended
desktop.
■
Press the
Esc
button on the remote control to cancel the E-Zoom
function.
■
Make sure your computer’s resolution setting is correct. Ideally, it
should be 1024
×
768 to match the projector’s native resolution.
If this option isn’t available, select one of the other compatible
video formats listed on page 144.
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
Summary of Contents for PowerLite 1716
