3.
Connect the other end of the cable to the projector's
HDMI /MHL
port.
Note:
The projector converts the digital audio signal sent from your video source into a mono analog
signal for the internal speaker.
Parent topic:
Connecting to a Component Video Source
If your video source has component video ports, you can connect it to the projector using an optional
component-to-VGA video cable. Depending on your component ports, you may need to use an adapter
cable along with a component video cable.
1.
Connect the component connectors to your video source's color-coded component video output
ports, usually labeled
Y
,
Pb
,
Pr
or
Y
,
Cb
,
Cr
. If you are using an adapter, connect these connectors
to your component video cable.
2.
Connect the VGA connector to a
Computer
port on the projector.
PowerLite 1224/1264
PowerLite 1284
3.
Tighten the screws on the VGA connector.
36
Summary of Contents for PowerLite 1224
