Epson picturemate PM 310, User Manual

Page: 25 / 40

PictureMate PM 300 / PM 310 Maintaining Your Printer
23
Englis
h
8. Pack the printer and the cardboard box in the box
that the printer came in.
c
Caution:
Make sure the photo cartridge is installed
before transporting. Do not place the
printer on its side or upside down, or ink
may leak.
Note:
If your prints do not look as good after the printer
has been moved, try aligning the print head. Press
Menu , select Maintenance , and then select
Print Head Alignment .
Replacing the Battery of the Remote
Controller
Use only a commercially available CR2025 lithium
button battery as a replacement battery.
1. Turn over the remote controller. While pushing the
hook inward, slide out the battery cover to remove
the old battery. Dispose of the old battery properly
in accordance with local laws.
Note:
Hold the remote controller with its top face down when
sliding out the battery cover. Otherwise, the battery will
fall out of the cover.
2. Fit a new battery into the slot of the cover and push
in the cover until it clicks into place.
For safety instructions regarding the battery, see
“When handling the battery for the remote controller”
on page 7.