PictureMate PM 215
Printing From an External Device
27
Disconnecting
Remove the Adapter’s connector from the EXT. I/F
port as shown below.
c
Caution:
❏
Do not remove this product while
communicating with another device.
❏
Do not disconnect this product while the
printer is operating. Doing so may cause
the printer to malfunction.
❏
Do not remove this product by pulling on its
upper section. Doing so may damage the
product.
Bluetooth settings
Use the LCD screen on PictureMate to make settings
for Bluetooth wireless communication.
&
See “Making settings” on page 28
Outline of settings
Setting
Choices
Description
Printer ID
printer
name-(number)
(Default = 1)
If multiple printers
enabled with Bluetooth
are in the same
communication range,
distinguish them by
assigning each number
from 0 through 9.
To make the Printer ID
setting take effect, turn
the printer off and then
back on.