22
THE IMAGE SYSTEM
Indicator light(green)
focus frame
THE IMAGE SYSTEM
A brief description of how to take photos.
TAKING PHOTOS USING THE LCD MONITOR
Press the POWER button to turn the
camera ON.
The lens will extend and the cover will open.
The picture will appear on the LCD screen.
You can use the LCD Monitor to compose your photo using automatic focusing.
The captured image will appear, then disappear.
Center the subject in the middle of
the focus frame of the LCD monitor.
Press the SHUTTER button halfway
to set the focus.
When focus is set, the indicator light turns steady
and the focus frame on the LCD monitor will turn
green a beep will sound. When the picture is not
in focus the indicator light will flash and the focus
frame on the LCD monitor will turn red. If this
occurs, take your finger off the shutter button and
try refocus the picture.
Please note that the picture will not focus if your
subject is closer than 50 cm. Use the MACRO
mode. (See page 50.)
Turn the DIAL SWITCH to PHOTO MODE.
POWER button
Be careful to avoid placing your fingers in front of the lens. Do not try to extend or retract the
lens manually. This may damage the mechanism.
