Epson PhotoPC 850Z, User Manual

Page: 201 / 249

15-8 Creating DPOF Files for Processing
6
Click the Upload button. You see a progress meter, and
after a moment
PrintMark V2.0
appears in the
Applications in Camera
listbox.
7
Click Close to exit.
Reading Error Messages
If you see an error message on the camera’s LCD screen,
check the following table to respond to the message.
LCD screen messages
Message Description
No Photos in Memory. This message appears when there are no photos
in memory. Press the button next to
OK to return
to the previous screen.
You can no longer
select an image. You have selected the maximum number of
photos that the program will allow you to print.
No memory Card
Inserted. No memory card is installed in the camera, or the
memory card is not fully inserted into its slot.
Insert a memory card as described on page 1-8.
Error!
Unable to access
DPOF file. This message appears if the memory card is
removed while using the Print Mark program.
(Never remove a memory card during any
operation, otherwise you may be unable to use
the photos in the card.) Turn off the camera and
re-insert the memory card.
Batteries are low. Use
AC adapter. Battery power is almost out. If you have the
optional AC adapter, connect it to continue.
Otherwise, replace the batteries with batteries
that have been fully charged.
You lost last print
settings. Are you
sure? There is already a DPOF file saved on the memory
card. If you create a new file, you overwrite the
saved print settings.
DPOF file made by
other writer exists. This message appears if the Print Mark program
tries to read a DPOF file made by a different
camera. Delete the file or create a new file.
Unable to save DPOF
file. No memory space
in card. The memory card doesn’t have enough space to
save a DPOF file. To create a DPOF file, delete
any unnecessary photos and try again.
LCD screen messages (Continued)
Message Description
Vega.book Page 8 Monday, September 13, 1999 11:36 AM