Epson PhotoPC 800, User Manual, Page: 50 / 224

3-6 Using the Camera Buttons to Change Settings
Press the ISO button on the back of the camera to cycle
through the three sensitivity settings.
The arrow icons in the upper left corner of the status display
panel indicate the sensitivity setting:
The standard setting is equivalent to ISO 100. This
is the recommended setting for most photos.
The high sensitivity setting is equivalent to ISO
200.
The super high sensitivity setting is equivalent to
ISO 400.
Adjusting the White Balance Setting
Normally the PhotoPC 800 adjusts the white balance of your
pictures automatically. This means that both outdoor and
indoor pictures have accurate colors, without a “bluish” or
“yellowish” appearance.
However, you can have the camera use a fixed white balance
for a warmer appearance under fluorescent lighting or for
special effects, such as a red-tinted sunset. You can also
customize the white balance setting.
Press the W.B. button on the back of the camera to cycle
through the three white balance settings.
ISO button
W.B. button
Altair.book Page 6 Thursday, July 1, 1999 3:33 PM