Epson PhotoPC 800, User Manual

Page: 180 / 224

12-8 Printing Directly From the Camera
Producing Your Printout
Before you print, you’ll need to make a few more Direct
Print settings. Follow these steps:
1
Press the ISO button (beneath Print ). The current print
settings appear on the screen (your settings may vary).
2
Press the
+
button (opposite Paper Type) to cycle
through the Paper Type settings and select the type of
paper or film you loaded in the printer. (The Paper Size
setting you previously selected is displayed beneath this
setting.)
3
Press the bottom button (next to Print Mode) to select
either
Normal
,
Fine
, or
Fast
printing mode.
Fine
print mode produces a higher-resolution, slower
printout. Fast print mode produces a quicker, lower-
resolution printout.
4
If you need to adjust the printing position of your paper,
press the top button (next to Adjust ). You see an
adjustment screen like this one.
5
Press the
+
button (next to the up arrow) or the
−
button (next to the down arrow) to adjust the vertical
position. Press the
ISO
button (under the left arrow) or
the W.B. button (under the right arrow) to adjust the
Altair.book Page 8 Thursday, July 1, 1999 3:33 PM