Epson PhotoPC 800, User Manual

Page: 111 / 224

Getting Photos Into Your Computer 6-9
A
B
6
What To Do if You See an Error Message
When you click the button to view images in the camera’s
memory card, you may see a message like the following:
Follow these tips to get your camera connected correctly:
1
Make sure the camera is turned on and has not shut off
automatically. If it has, turn the camera dial to Off , then
to .
2
Check the cable and make sure the connections are
secure. Make sure the pins inside the connector are not
bent.
3
Make sure your batteries have enough power, or your
AC adapter is connected.
4
Click Retry . If you see the Connection Failed
message again, click
Connection
.
You see the following dialog box:
5
Select another image source, if necessary. If you’re using
a PCMCIA adapter to access images from a PC card
slot, select
PC Card
.
6
Select another port if necessary. In most cases, it’s best to
leave the
Port
setting at
Auto
because Image Expert can
detect the camera connection automatically.
If you have a serial device connected to one port and an
internal modem on the other, you can try setting the
Port to COM3 or COM4.
Altair.book Page 9 Thursday, July 1, 1999 3:33 PM