Epson PhotoPC 700, User Manual

Page: 46 / 198

Taking Pictures
2-17
A
B
2
2
Press or if necessary to display the Panorama/
Zoom menu:
3
Press the
SELECT
button twice to choose the Zoom
setting.
4
Press the
BACK
button to exit the menus.
An orange frame appears around the previewed image,
and the zoom icon
is displayed at the bottom of
the screen. You see
X2.0
in the upper right corner.
5
Press the shutter button halfway to lock the auto focus.
You hear a click, the status light turns orange, and a
small green circle appears in the upper right corner of
the screen. While you hold the button down, you can
reframe your picture if you want.
6
Press the button all the way down to capture the image.
The zoom format remains active until you access the
Panorama/Zoom menu again and select
Standard .
Continuous Shooting
In this mode, you can take two pictures a second,
with up to ten pictures in a sequence. Each image is
640
×
480 pixels. You can capture a complex motion, such as
a golf swing, in a series of steps to create animation sequences
for the Internet, screen savers, or presentations.
NOTE
You can’t use the flash for continuous shooting, so make sure
you have adequate lighting for your pictures. In addition, you can’t
use the panorama/zoom features with continuous shooting.
Make sure the screen switch is set to View , and follow these
steps to take a rapid sequence of pictures:
1
Press the SELECT button to display the menus.
Popch2.fm5 Page 17 Friday, May 15, 1998 2:39 PM