Epson PhotoPC 700, User Manual

Page: 31 / 198

2-2
Taking Pictures
Getting Ready to Take Pictures
Before you can take pictures with PhotoPC 700, you need to
turn on the camera and check the status of your batteries on
the display panel.
Turning the Camera On and Off
To turn the camera on, rotate the lens cover counter-
clockwise, as shown in the illustration on the right. The lens
cover opens and the display panel on the top of the camera
lights up. The status light on the back of the camera flashes
for a few seconds. When it turns green, the camera is ready to
take pictures.
To turn off the camera, rotate the lens cover clockwise. The
lens cover closes and the display panel turns off.
.
Saving Battery Power With Auto Shut-off
If you wait more than 60 seconds before taking a picture, the
camera shuts off automatically to save battery power. It also
shuts off after you take a picture with the LCD screen. To
“wake” the camera after auto shut-off, press the shutter
button. Or, close the lens cover and then open it again.
display panel
On
Off
shutter
button
Popch2.fm5 Page 2 Friday, May 15, 1998 2:39 PM