manualshive.com logo in svg

Epson Perfection 610 Scanner, Scanner Basics

Share
Download
Epson Perfection 610 Scanner Scanner Basics Download Page 59

54

Scanner Lamp Error Indication

If an error occurs, the scanner stops and its lamp shows the type of error.

The scanner turns the fluorescent lamp off if it does not 
receive commands from EPSON TWAIN within ten minutes.

Problem Solving

If you’re having problems, this section answers some of the most common questions. 

Operating Problems

Problems you may have while using the scanner often involve the operation of your 
software and computer. Operation problems usually occur because of:

■

Incorrect setup of your computer or software

■

Incorrect operation of your software

■

Inappropriate selection of the scanner software settings

Lamp activity

Explanation

Rapidly flashing

The scanner is not connected properly. Check the USB 
connection and unplug the scanner. Wait at least ten 
seconds, then plug the scanner in again.

The transportation lock is not released or the scanner is 
broken. Make sure the transportation lock is in the 
unlocked position. Then unplug the scanner, wait at least 
ten seconds, then plug it in again. If the scanner still does 
not operate correctly, or if the error occurs repeatedly, 
consult your dealer.

Off

The lamp is burned out. Consult your dealer to get a 
replacement lamp.

basics.book  Page 54  Wednesday, August 11, 1999  2:26 PM

Summary of Contents for Perfection 610 Scanner

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands