❏
Place the AC adapter near an electrical outlet where the power cord can be easily unplugged.
❏
The AC adapter and power cable provided are designed for use with the viewer. Do not attempt
to use them with other electronic devices unless specified.
❏
Do not remove the AC adapter from the viewer during operations (connecting the AC adapter
during operations is possible).
❏
The AC adapter included is designed for use with the viewer. Use of any other adapter could
result in fire, electrical shock, or injury.
❏
Use only AC adapter model A351H with the viewer.
❏
Make sure the total amperage of all devices plugged into the power outlet does not exceed the
power outlet’s ampere rating.
❏
Do not connect the AC adapter when the battery is not installed. Otherwise, the viewer may be
damaged.
❏
If you plan to use this product in Germany, the building installation must be protected by a 16
amp circuit breaker to provide adequate short-circuit protection and over-current protection for
this product.
❏
Do not use a damaged or frayed AC adapter.
❏
If you use an extension cord with the viewer, make sure the total amperage of all devices plugged
into the extension cord does not exceed the cord’s amperage rating.
❏
Never disassemble, modify, or attempt to repair the AC adapter by yourself except as specifically
explained in this guide.
❏
Do not use power outlets controlled by wall switches or automatic timers.
❏
Do not use power outlets on the same circuit as large motors or other appliances that may cause
voltage fluctuations.
❏
Avoid using outlets on the same circuit as photocopiers or air control systems that regularly
switch on and off.
❏
To prevent fire or electric shock, do not cover the AC adapter with a blanket or similar covering.
❏
Position the viewer’s power cable so that it will not be stepped on or run over.
❏
Do not place any objects on the power cable and the AC adapter.
❏
Keep the power cable straight at the ends and at the points where it enters the transformer.
R41A0K180 User’s Guide
Safety Instructions
14
