Epson OmniLink TM-T70-i, Technical Reference Manual

Page: 81 / 120

81
Chapter 3 Application Development Information
3
Web Service Settings - Device Admin - Customer Display
Yo u ca n u se t h i s t o se t comm uni ca ti o n w it h t he c u s t omer d i splay a n d check it s opera ti o n .
Item Description
Customer Display Set whether to use the Customer Display.
Communica-
tions settings
Communications
speed (bps)
Set the communication speed.
Data bit Set the data bit length.
Parity Set the parity.
Brightness settings Set the brightness of the customer display.
You can set 20%, 40%, 60%, or 100%. The maximum bright-ness is
100%.
Test display Performs a test display to the customer display.
When SSL is enabled on this product, make sure that the
certificate issued by the signature source certification authority of
the SSL certificate imported to this product is registered in the
computer or device.
Apply Saves settings to TM-T70-i.
Communication speed and other items must be set for this product in order to control the cus-
tomer display as an RS232C-compliant serial communication device. Set these items to match
the communication conditions of the customer display connected to.

There is no need to install a USB RS232 conversion driver.

If you use the default settings unchanged, there will be no need to alter the communication
settings.