Epson OmniLink TM-T70-i Technical Reference Manual Download Page 80

Page: 80 / 120

Web Service Settings - Device Admin - Printer

int

ers or check

r opera



This product cannot be deleted from a device.



The "device ID" for this product can be changed. For detail, see to

Changing Device ID of

This Product" on page 54.

Item

Description

Printer to be

registered

Device ID

Sets the ID of a printer to register.

Model

Selects the model of a printer to register.

IP Address

Sets the IP address of a printer to register.

Retry Interval (ms)

Sets the retry interval of a printer to register.

Add

Adds a printer to the Device List.

Registered printers

Displays a list of registered printers.

Test Print

Performs a test printing.

When SSL is enabled on this product, make sure that the certificate

issued by the signature source certification authority of the SSL

certificate imported to this product is registered in the computer or

device.

Delete

Deletes a registered printer.

Summary of Contents for OmniLink TM-T70-i

























































































































Search results

Summary of Contents for OmniLink TM-T70-i

Reviews:

Related manuals for OmniLink TM-T70-i

Brands by name

Popular brands

Epson OmniLink TM-T70-i, Technical Reference Manual

Search results

Summary of Contents for OmniLink TM-T70-i

Reviews:

Related manuals for OmniLink TM-T70-i

Brands by name

Popular brands