116
Printing and Cutting Positions
Paper Specifications
The values above may vary slightly as a result of paper slack or variations in the paper.
Take this into account when setting the cutting position of the autocutter.
80 mm width paper printing
58 mm width paper printing
Paper types
Specified thermal paper
Form
Roll paper
Size
Roll paper diameter
83 mm {3.27"} maximum
Roll paper core
Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
Roll width when taken
up
80 + 0.5/-1.0 mm
58 + 0.5/-1.0 mm
Paper width
79.5 ± 0.5 mm
57.5 ± 0.5 mm
Specified roll paper type
NTP080-80
NTP058-80
Specified original paper type
P300, P310, P350 (Kanzaki Specialty Papers)
AF50KS-E (Jujo Thermal Oy)
F5041 (Mitsubishi HiTec Paper Flensburg GmbH)
Paper must not be pasted to the roll paper core.
The remaining amount of the roll paper when a roll paper near-end is detected differs
depending on the core type.
Autocutter blade position
Approx. 30 (mm)
Approx. 13 (mm)
Manual-cutter position
Center of the print dotline
Paper feed direction
Printable area
Last line of
a previous receipt
Summary of Contents for OmniLink TM-T70-i
Page 26: ...26 ...
