Epson MovieMate 25, User Manual

Page: 33 / 76

33
Adv
anced O
per
ations
1
Press twice during playback.
The following status bar and menu bar are projected.
2
Press until the pointer reaches the item you wish to
use.
3
Press .
•
Press once to cancel the menu bar.
•
When playback is stopped, some functions may not work.
•
The status bar is not displayed when playing back cinemascope (letter-
box) . Although functions can be set in this state, when it is
necessary to display the status bar, press to return the aspect ratio
to normal. Press to return to the former aspect ratio.
Menu bar function list
Select the repeat mode.
See page 27, 28.
Set a time based start point.
See page 24.
only.
During playback, select the chapter number you wish to play using
the numeric buttons.
Set the function/numerics toggle switch to the [123 ] position. Then
enter the number as shown in the following examples.
5: 10:
→
20:
→
If you make a mistake, enter the correct number again.
Press .
Select the audio language/type.
See page 31.
Select to change the subtitles display.
See page 32.
Select the angle.
See page 32.
Using the menu bar
Make sure the switch is set to the
[Function] position.