Epson MovieMate 25, User Manual

Page: 29 / 76

29
Adv
anced O
per
ations
You can set titles, chapters, and tracks to play in the order of your preference.
1
Press when stopped.
Each time you press , the display window on the main unit changes
as follows. Press repeatedly until “PRGM” is displayed.
2
Set the order according to the following screen explanations.
See “Using the numeric buttons” on page 19.
3
Press .
•
Playback begins according to the order you set.
•
Once the set playback is complete, playback ends and “Program” is
displayed.
Canceling set items on the program screen individually
Press to delete set numbers one by one.
Canceling all set items on the program screen
Press .
Set items are also cancelled when the power is switched off.
Resuming normal playback
When stopped, press repeatedly until the display window returns to its nor-
mal display state.
In this case, the contents entered in the program screen remain in memory. Program
play can be executed by pressing again and selecting “PRGM.”
•
A maximum of 99 titles, chapters, or tracks can be selected. If you try to
enter more than 99, “FULL” is displayed.
•
If the total playback time exceeds 9
hours, 59 minutes and 59 seconds, “--:--” is displayed in the display
window. However, you can continue to perform the set order as it is.
•
If you press , instead of setting the chapter or track num-
ber, “ALL” is displayed and all of the chapters and tracks contained in
that title/group are selected.
•
If stopped during program play mode, resume play cannot be used.
•
Depending on the type of disc, you may not be able to use program play.
Playing in the order of your choice (program play)
Make sure the switch is set to the
[Function] position.
Program play
Random play (see page 30)
Normal playback Normal
display