Epson Moverio Pro BT-2000 Developer'S Manual Download Page 8

Page: 8 / 202

MOVERIO Pro Developer's Guide (Rev.1.4)

1.1.

Product Summary and Functions

The BT-2000/2200 is a smart headset for business use. The same optical see-through

technology as the consumer orientated MOVERIO BT-200 has been adopted. This allows

information to be displayed across a wide viewing area while keeping eye movement to a

minimum, thereby reducing fatigue and making it suitable for use at work. This also allows you

to view your surroundings while projecting an image, which adds an aspect of safety.

The weight of the product is supported by the entire head, allowing you to work for long periods

of time without feeling fatigued. You can work while checking images in a hands-free

environment.

Summary of Contents for Moverio Pro BT-2000











































































































































































































Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands

Epson Moverio Pro BT-2000, Developer'S Manual

Search results

Summary of Contents for Moverio Pro BT-2000

Reviews:

Related manuals for Moverio Pro BT-2000

Brands by name

Popular brands