1-20
Setting Up the Printer
R4C4610
Rev. C
A5 size
SETUP.FM
6/28/00
Pass 3
L
Proof Sign-off:
SEI
Y.Ohkawara K.Kono
K.Kono
SEI
M.Kauppi
If you wish to make a diskette version of the printer software
on your CD-ROM, type
EPSETUP
instead of
SETUP
. In the
dialog box that appears, click the
Driver disk creation utility
button and follow the on-screen instructions.
4. The installation program begins copying the printer software
files.
5. When the installation is complete, click
OK
to exit the
installation program.
The installation program automatically selects the LX-300+ as the
default printer for Windows applications.
For information on opening and using the software, see Chapter 3,
“Using the Printer Software.”
For DOS programs
To control the printer from DOS application programs, you need
to select the printer you are using or another available printer
from the printer list of your application.
Choose the EPSON LX-300+ printer at the appropriate step in the
setup or installation procedure of your DOS application program.
If the list in your application does not include the LX-300+ printer,
choose the first available printer from this list:
If you plan to use color, you must choose either LX-300+, LX-300,
JX-80, or EX-800. The other printers cannot use color.
Note:
If your application does not list a suitable alternative, contact the
software manufacturer to see if an update is available.
LX-300
LX-810/850
LX-80/86
FX-850
FX-86e/800
JX-80
EX-800
Any FX printer
EPSON printer
Draft printer
