Epson LX-1170, User Manual

Page: 36 / 154

1-20
Setting Up the Printer
Installing the software in Windows Me, 98, 95,
2000, or NT 4.0
Follow these steps to install the printer software in Windows Me,
98, 95, 2000, or NT 4.0:
Note:
❏
Installing the printer software for Windows 2000 or NT 4.0 may
require administrator privileges. If you have problems, ask your
administrator for more information.
❏
If you wish to make a floppy disk version of the printer software on
your CD-ROM, insert the CD and run the EPSETUP program. In
the dialog box that appears, click the
Driver disk creation utility
button and follow the on-screen instructions.
❏
If you are using the floppy disk version of the EPSON software, make
a backup copy of the EPSON printer software disk or disks before
you begin installation.
❏
If the New Hardware Found screen or any other wizard appears
when you turn on your computer, click
Cancel and follow the steps
below.
❏
If the Digital Signature Not Found screen appears, click Yes . If you
click No , you must reinstall the printer driver as described below.
❏
Installation time varies depending on your computer.
1. Make sure Windows Me, 98, 95, 2000, or NT 4.0 is running
and the printer is off.
2. Insert the printer software CD-ROM into the CD-ROM drive.
The Install dialog box appears. (If you are using a floppy disk,
insert the disk into the floppy disk drive. Double-click the
floppy disk drive icon and then double-click the
Setup.exe
icon.)