Epson LX-1170+II User Manual Download Page 69

Page: 69 / 159

5. Select whether to use the printer as the default printer or not,

then click

6. Click

Finish

Installing the printer driver from the CD-ROM

This section describes how to install the printer driver in the
clients when the computers of the server and clients use different
OS.

The on-screen displays on the following pages may differ
depending on the version of Windows OS.

Note:

❏

When installing in Windows XP, 2000, or Windows NT 4.0 clients,
you must access Windows XP, 2000, or Windows NT 4.0 with the
Administrator.

❏

If the computers of the server and clients use the same OS, you do
not have to install the printer drivers from the CD-ROM.

1. Access the shared printer and a prompt may appear. Click

, and then follow the on-screen instructions to install the

printer driver from the CD-ROM.

2. Insert the CD-ROM, then the EPSON Installation Program

dialog box appears. Cancel the dialog box by clicking

Cancel

, then type the appropriate drive and folder names in

which the printer driver for clients is located, then click

Summary of Contents for LX-1170+II
































































































































































Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands

Epson LX-1170+II, User Manual

Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands