Epson LX-1170+II User Manual Download Page 60

Page: 60 / 159

With Windows XP, 2000, or Windows NT 4.0

When the printer server’s OS is Windows XP, 2000, or Windows
NT 4.0, follow these steps to set the printer server.

Note:

You must access Windows XP, 2000, or Windows NT 4.0 as the
Administrators of the local machine.

1. For a Windows 2000 or Windows NT 4.0 printer server, click

Start

, point to

Settings

, and click

Printers

For a Windows XP Professional printer server, click

Start

, and

click

Printers and Faxes

For Windows XP Home Edition printer server, click

Start

click

Control panel

, then click

Printers and Faxes

2. Right-click your printer icon, and click

Sharing

in the menu

that appears.

For Windows XP, if the following menu appears, click either

Network Setup Wizard

If you understand the security

risks but want to share printers without running the wizard,
click here.

In either case, follow the on-screen instructions.

Summary of Contents for LX-1170+II
































































































































































Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands

Epson LX-1170+II, User Manual

Search results

Summary of Contents for LX-1170+II

Reviews:

Related manuals for LX-1170+II

Brands by name

Popular brands