36
❏
Load labels the same way as you would load ordinary
continuous paper. See “Printing with the pull tractor” for
loading instructions.
❏
Because labels are especially sensitive to temperature and
humidity, use them only under normal operating conditions.
❏
Do not leave labels loaded in the printer between jobs; they
curl around the platen and may jam when you resume
printing.
❏
To remove the labels from the printer, tear off the fresh supply
at the bottom of the printer; then press
LF/FF
to advance the
remaining labels out of the printer.
c
Caution:
Never feed labels backwards through the printer; they can easily
peel off the backing sheet and jam the printer. If a label does become
stuck in the printer, contact your dealer.
Envelopes
You can feed envelopes individually using the paper guide. Keep
the following tips in mind:
❏
Before loading an envelope, set the paper thickness lever to
the proper position. See “Adjusting the paper thickness
lever”.
❏
To load an envelope, follow the steps in “Loading single
sheets”. Insert the wide edge of the envelope into the printer
first, printable-side down. When you insert the envelope
between the paper guides, push it firmly and hold it until it
feeds into the printer.
❏
Use envelopes only under normal temperature and humidity
conditions.
Summary of Contents for LX-1170+II
Page 1: ...User s Guide NPDxxxx 00 ...
Page 13: ...13 Glossary Index ...
