manualshive.com logo in svg

Epson LQ-780N, Network Manual

Share
Download
Epson LQ-780N Network Manual Download Page 54

Disable IPsec/IP filtering from the printer’s control panel. Connect the printer and computer and make the
IPsec/IP Filtering settings again.

Related Information

&

 

“Encrypted Communication Using IPsec/IP Filtering” on page 38

Problems on Using a Digital Certificate

Cannot Import a CA-signed Certificate

Does the CA-signed certificate and the information on the CSR match?

If the CA-signed certificate and CSR do not have the same information, the CSR cannot be imported. Check the
following:

❏

Are you trying to import the certificate to a device that does not have the same information?

Check the information of the CSR and then import the certificate to a device that has the same information.

❏

Did you overwrite the CSR saved into the printer after sending the CSR to a certificate authority?

Obtain the CA-signed certificate again with the CSR.

Is the CA-signed certificate more than 5KB?

You cannot import a CA-signed certificate that is more than 5KB.

Is the password for importing the certificate correct?

If you forget the password, you cannot import the certificate.

Related Information

&

 

“Importing a CA-signed Certificate” on page 35

Cannot Update a Self-Signed Certificate

Has the Common Name been entered?

Common Name

 must be entered.

Have unsupported characters been entered to Common Name? For example, Japanese is not supported.

Enter between 1 and 128 characters of either IPv4, IPv6, host name, or FQDN format in ASCII (0x20-0x7E).

Is a comma or space included in the Common Name?

If a comma is entered, the 

Common Name

 is divided at that point. If only a space is entered before or after a

comma, an error occurs.

Related Information

&

 

“Updating a Self-signed Certificate” on page 37

     Network Guide

Solving Problems

54

Summary of Contents for LQ-780N



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands