manualshive.com logo in svg

Epson LQ-2090, Reference Manual, Page: 134 / 248

Share
Download
Epson LQ-2090 Reference Manual Download Page 134

126

Control Panel

Note:
You cannot change the setting value to the previous item. You have 
to press the 

Set

 button until the value you want is selected.

7. When you finish making settings, press the 

Menu

 (

Pitch

 and 

Tear Off/Bin

) buttons. 

The 

Menu

 lights (both of the 

Tear Off/Bin

 lights) turn off and 

the printer exits the default-setting mode.

The settings you made is saved as new default value.

Note:
If you turn off the printer prior to exiting default-setting mode, any 
changes you may have made are canceled and not saved.

Lock-Out Mode

You can restrict the use of buttons on the control panel by using 
the lock-out mode. In the basic setting, you can only use the 

Pause

, 

Load/Eject

 and 

Tear Off/Bin

 buttons, when the lock-out 

mode is on.

Turning on or off the lock-out mode

You can turn on or off the lock-out mode easily by using buttons 
on the control panel.

Follow these steps to turn on the lock-out mode:

1. Make sure the printer is turned off.

Summary of Contents for LQ-2090

























































































































































































































































Reviews:

No comments