background image

2-8

Using the Printer

Packet mode

Make sure to select 

AUTO

 to print from Windows applications 

using the printer driver included in the software CD-ROM that 
comes with the printer. Turn off this mode if you encounter 
connection problems when you are printing from applications 
based on other operating systems such as DOS.

Character table

You can select among various character tables.

International character set for Italic table

You can select among several international character sets for the 
Italic character table. Each character set contains eight characters 
that vary depending on the country or language, so you can 
customize the Italic table to suit your printing needs.

Font

You can select six fonts in the Default Setting mode. The font 
selected here appears under 

Others

 

on the control panel. The 

fonts indicated on the control panel cannot be selected in the 
Default Setting mode.

Auto CR (carriage return)

This setting is available only in the IBM PPDS emulation mode. 
When auto carriage return is on, each line feed (LF) code or ESC 
J code is accompanied by a carriage return code. This moves the 
print position to the beginning of the next line.

A.G.M. (Alternate Graphic Mode)

This setting is available only in the IBM PPDS emulation mode. 
When A.G.M. is on, the printer can use some advanced graphics 
commands like those available in the ESC/P2 mode. 

Summary of Contents for LQ-1150 II


































































































































Reviews: