Epson LQ-1050, User Manual

Page: 320 / 356

E S C ( -
Select Score
Format:
ASCII code:
Decimal: 27
H e x a d e c i m a l :
Comments:
Use decimal or hexadecimal values for all variables, not ASCII
characters.
Use the following values for the first 3 variables:
must be 3.
must be 0.
The value of
d1
determines the location of the score:
d1
= 1 for underline.
d1
= 2 for strike-through.
d1 = 3
for overscore.
The value of
d2
determines whether the score line is single,
double, broken, or continuous:
d2
= 0 Cancel the score line selected by
d1.
d2
= 1 Single continuous line.
d2
= 2 Double continuous line.
d2
= 5 Single broken line.
d2
= 6 Double broken line.
The last three bits of
d2
determine the characteristics of the score
line as shown below:
On (1)
Off (0)
Bit 2 Bit 1
Broken line Double line on
Continuous line Double line off
Bit 0
Single line on
Single line off
Note: If bit 1 and bit 0 are both off, the selected score is
canceled. Double line and single line scores cannot be
combined at the same score position.
Command Summary 9-31