Epson LQ-1050, User Manual

Page: 293 / 356

For the following commands that use only 0 or 1 for the variable,
either the decimal or hexadecimal values 1 and 0 or the ASCII
1 and 0 can be used:
ESC U, ESC x, ESC p, ESC W, ESC S, ESC-, ESC %, and ESC w.
For example, in BASIC you can turn on proportional spacing with
either of these statements:
Control Key Chart
Some application programs use control key codes for decimal values
O-27. The table
below
gives you the proper values. The Control Key
column indicates that you press the control key at the same time
you press the key for the letter or symbol in
that
column. For
example, you press the control key and A at the same time to send
the value 1.
Some
application programs that use this system cannot use
Control-@, and many programs use the control keys for other
purposes.
9-4
Command Summary