Epson Livingstation LS47P2 User Manual Download Page 78

Page: 78 / 138

Viewing, Printing, and Saving Photos

•

The photo files must contain a time stamp, so the slide show can display the files in time
stamp order.

•

The photo files should contain thumbnail data, such as that included in Exif format
JPEG files, to speed up display of the files in the Photo viewer.

Make sure the TV is turned on and the

Power

light is green and not flashing. Also make

sure the

Card

and

Printer

lights are off.

Insert your photo card in the appropriate slot on the TV’s front panel as shown on the
next page. The

Card

light flashes orange as the TV reads the data on the card.

Caution

Don’t remove a card from
the slot when the Card light
is flashing or you may
damage the card. Wait
until the Card light shines
green to remove the card.

CompactFlash

card

SmartMedia

card

Turn the card so the metal contacts face down

Memory Stick

SD/MultiMediaCard

™

Summary of Contents for Livingstation LS47P2











































































































































Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands

Epson Livingstation LS47P2, User Manual

Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands