Epson Livingstation LS47P2 User Manual Download Page 111

Page: 111 / 138

Caring For the TV

111

Flip up the lock cover.

Close the printer cover.

If you see any error messages when you print, you may need to reinstall the ink cassette.
Carefully follow the steps in this section to reinstall it.

Moving or Transporting the TV

When moving the TV, have two people grasp the TV as shown below. Lift the TV using the
handles on the back and the top of the TV frame in the front.

When shipping the TV or transporting it for a long distance, pack it in its original box using
the original packing materials.

WARNING

The TV is very heavy. Two
people are required to lift
or move the TV to avoid
injury.

Never move the TV and its
stand or other support
together or the TV may fall
and cause injury or be
damaged.

Be careful not to drop the
TV during transport; it may
cause injury or the TV may
be irreparably damaged.

Summary of Contents for Livingstation LS47P2











































































































































Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands

Epson Livingstation LS47P2, User Manual

Search results

Summary of Contents for Livingstation LS47P2

Reviews:

Related manuals for Livingstation LS47P2

Brands by name

Popular brands