Epson LightScene EV-110 User Manual Download Page 91

Page: 91 / 210

Press the

Spotlight

button on the remote control.

The projection image becomes a spotlight.

Press the

Effect

button on the remote control to change the overlay effect and shape filter for the

spotlight.

Parent topic:

Using Basic Projector Features

Related concepts

Overlay Effects and Shape Filters

Selecting a Playlist on an SD Card

You can create playlists combining images and movies and save them to an SD card. You can then
insert the SD card into the projector and select the playlist you want to project.

Note:

See the

Epson Projector Content Manager Operation Guide

for information about creating

playlists and exporting them to an SD card.

Insert an SD card containing content playlists into the projector's

card slot.

Summary of Contents for LightScene EV-110



















































































































































































































Search results

Summary of Contents for LightScene EV-110

Reviews:

Brands by name

Popular brands

Epson LightScene EV-110, User Manual

Search results

Summary of Contents for LightScene EV-110

Reviews:

Brands by name

Popular brands