Epson LABELWORKS PX User Manual Download

Page: 38 / 60

Frame and Table Lists

Changing the LW-PX900 Settings

Auto cut

Sets whether or not to cut automatically.
When "Auto cut"is set to " On ", the function (Half cut) for

precutting just the label part to make the backing paper

easy to peel off is set.

Print density

Sets the print density.

Drop stop

This function is useful for affixing consecutively printed

labels one at a time.
When "On" is selected, printed labels will not be scattered

because they are stacked in the tape eject slot and a label is

output each time a label is removed.

This function is only available when the label length is

28 mm or more, "Auto cut" is set to "On", and "Half cut" is set

to "Off".

Die-Cut pos

Adjusts the text position of die cut label.
Width pos: Adjusts the vertical positioning of text.

Length pos: Adjusts the horizontal positioning of text.

Backlight

Sets the display backlight to On or Off.

Language

You can select the language shown on the display from the

following:

Dansk, Deutsch, English, Español, Français, Italiano, Nederlands,

Norsk, Português-Br, Português-EU, Suomi, Svenska, Türkçe

inch:cm

The unit of length used to indicate the label size can be

switched between inch and cm.

MEMO

Version: To make sure the version number that has been installed in

the printer.

Procedure for setting

1. Press

2. Select the desired function with

and

press

3. Select the desired item with

and press

Summary of Contents for LABELWORKS PX





























































Search results

Summary of Contents for LABELWORKS PX

Reviews:

Related manuals for LABELWORKS PX

Brands by name

Popular brands

Epson LABELWORKS PX, User Manual

Search results

Summary of Contents for LABELWORKS PX

Reviews:

Related manuals for LABELWORKS PX

Brands by name

Popular brands