119
Parent topic:
Shutting Off the Picture and Sound Temporarily
You can temporarily turn off the projected picture and sound if you want to redirect your audience's
attention during a presentation. Any sound or video action continues to run, however, so you cannot
resume projection at the point that you stopped it.
If you want to display an image such as a company logo or picture when the presentation is stopped, you
can set up this feature using the projector's menus.
1.
Press the
A/V Mute
button on the remote control to temporarily stop projection and mute any sound.
2.
To turn the picture and sound back on, press
A/V Mute
again.
Note:
The projector's power automatically turns off thirty minutes after A/V Mute is enabled. You can
disable this feature in the projector's
Eco
menu.
Parent topic:
Related tasks
Saving a User's Logo Image to Display
Stopping Video Action Temporarily
You can temporarily stop the action in a video or computer presentation and keep the current image on
the screen. Any sound or video action continues to run, however, so you cannot resume projection at the
point that you stopped it.
