Epson Home Cinema 2350, User Manual

Page: 27 / 149

27
1. Pass the safety wire through the security cable attachment point on the projector.
2. Attach the other end of the safety wire to a structure that is strong enough to bear the projector's
weight. If the wire is too long, loop the wire around so that there is as little slack as possible.
Parent topic: Projector Placement
Related references
Optional Equipment and Replacement Parts
Installing Batteries in the Remote Control
The remote control uses the two AAA batteries that came with the projector.
Note: Make sure you read the safety instructions in this manual before handling the batteries.
Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types,
or mix new and old batteries.