Epson Home Cinema 2100 User Manual Download Page 53

Page: 53 / 158

Related references

Projector Setup Settings - Extended Menu

Turning Off the Projector

Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.

Note:

Turn off this product when not in use to prolong the life of the projector. Lamp life will vary

depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.

Note:

When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the

projector.

Press the power button on the projector or the remote control.

The projector displays a shutdown confirmation screen.

Press the power button again. (To leave it on, press any other button.)

The projector beeps twice, the lamp turns off, and the status light turns off.

Note:

With Epson's Instant Off technology, there is no cool-down period so you can pack up the

projector for transport right away (if necessary).

Caution:

Do not turn the projector on immediately after turning it off. Turning the projector on and off

frequently may shorten the life of the lamp.

Summary of Contents for Home Cinema 2100































































































































































Search results

Summary of Contents for Home Cinema 2100

Reviews:

Related manuals for Home Cinema 2100

Brands by name

Popular brands

Epson Home Cinema 2100, User Manual

Search results

Summary of Contents for Home Cinema 2100

Reviews:

Related manuals for Home Cinema 2100

Brands by name

Popular brands