Epson Home Cinema 2100, User Manual

Page: 106 / 158

106
Event ID code Cause and solution
0434 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again
0481
0482
0485
0484 Communication with computer was disconnected. Restart the network software.
0483 The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0479 A projector system error has occurred. Turn the projector off and then on again.
04FF
0891 Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
0892 The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
0894 Communication with unauthorized access point was disconnected. Contact your
network administrator.
0898 Failed to acquire DHCP address. Make sure the DHCP server is operating correctly.
If you are not using DHCP, turn off the
DHCP setting in the Network menus.
0899 A communication error has occurred. Try restarting the networks fotware and your
projector. If that does not solve the problem, contact Epson for help.
Parent topic: Projector Information Display - Info Menu
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.