92
Turning On Auto Iris
In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on
the brightness of the content you project.
1.
Turn on the projector and switch to the image source you want to use.
2.
Press the
Menu
button.
3.
Select the
Image
menu and press
Enter
.
4.
Select the
Auto Iris
setting and choose one of the following:
•
High Speed
to adjust brightness as soon as the scene changes.
•
Normal
for standard brightness adjustment.
Note:
You can set
Auto Iris
for each Color Mode that supports the feature. You cannot change the
Auto Iris
setting when you are using a
Closed Caption
setting.
5.
Press
Menu
or
Esc
to exit the menus.
Parent topic:
Related references
Summary of Contents for Home Cinema 1060
