63
4.
Select the
Notifications
menu and press
Enter
.
5.
Turn on the
SNMP
setting.
6.
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field.
Note:
To enter the IP address using the numeric keys on the remote control, press and hold the
Num
button. Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x
is a number from 0 to 255).
7.
If you want this projector to receive broadcasted messages over the network, select the
Others
menu and turn on the
Message Broadcasting
setting. Administrators can broadcast messages over
the network using Epson Projector Management (Windows only).
8.
When you finish selecting settings, select
Complete
and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic:
Using the Projector on a Network
Controlling a Networked Projector Using a Web Browser
Once you have connected your projector to your network, you can select projector settings and control
projection using a compatible web browser. This lets you access the projector remotely.
Summary of Contents for Home Cinema 1060
