Paper Handling
31
R4CC530
long.bk
Rev. E
A5 size
PAPER.fm
6/23/03
R
Proof Sign-off:
ABE J. Hashimoto, S. Yamamoto
H. Kimura
S. Halvorson
2
2
2
2
2
2
2
2
2
2
2
2
If the first line on your page appears too high or low, you can
change its position using the Micro Adjust function as described
in “Adjusting the top-of-form position” on page 64.
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Removing the tractor from the rear push position
Follow these steps to remove the tractor from the rear push
position:
1. Make sure the printer is turned off.
2. Remove any paper from the tractor as described in
“Removing continuous paper” on page 47.
3. Press the tractor’s lock tabs, tilt the tractor up, and lift it out
of the printer.