Epson FX-80 User Manual Download Page 359

Page: 359 / 376

INDEX

Note: Refer to Table of Contents and List of Figures for specific

programs. Also, the chapter summaries are not indexed.

Accessories, 16

American Standard Code for Information Interchange.

See

ASCII

Apostrophe.

See

REMarks

Apple II computers, 38,

40, 312-313

See also

Seven-bit systems

Arrays,

173-176,189-193

DIMensioning,

176

Arrow.

See

Exponent character

ASCII (American Standard Code for Information Interchange),

38,40-42

codes listed for all characters, 253-270

See also

International character set

Attribute byte.

See

User-defined characters

Automatic test.

See

Test

See

Blank space

Backspace, 81-83

CHR$(8) produces it.

Bail.

See

Paper bail

Barchart, 227-231

BASIC program listings, 322

Beeper, 41-42, 304-305

CHR$(7) sounds beeper.

Bidirectional printing.

See

Unidirectional Mode

Bit, high order, 310-311

ESCape “>” turns it on; ESCape "=" turns it off; ESCape “#” accepts

eighth bit as is from the computer.

See also

even-bit systems

Blank space, v

Board, serial and interface.

See

Interface

Bold printing.

See

Double-Strike; Emphasized; Proportional

Bracket.

See

Exponent character

Buffer.

See

Printer buffer

Business applications, 227-238

Byte, Attribute.

See

User-defined characters

337

Summary of Contents for FX-80

























































































































































































































































































































































































Search results

Summary of Contents for FX-80

Reviews:

Brands by name

Popular brands

Epson FX-80, User Manual

Search results

Summary of Contents for FX-80

Reviews:

Brands by name

Popular brands