manualshive.com logo in svg

Epson FX-80, User Manual

Share
Download
Epson FX-80 User Manual Download Page 306

Appendix C

Control Codes by Function

This Appendix shows the same control codes as Appendix B, but

this time arranged by categories before ASCII order. If your computer

cannot generate lowercase letters, use the equivalent decimal ASCII

values. See Appendix B or refer to the pages suggested by the Index for

usage instructions.

Character Width (Pitch)

CHR$(27)“M”

Turns Elite Mode ON.

CHR$(27) "P"

Turns Elite Mode OFF.

CHR$(15)

Turns Compressed Mode ON.

CHR$(18)

Turns Compressed Mode OFF.

CHR$(14)

Turns one-Line Expanded Mode ON.

CHR$(20)

Turns one-Line Expanded Mode OFF.

CHR$(27)“W0”

Turns Expanded Mode OFF.

CHR$(27)“W1”

Turns continuous Expanded Mode ON.

CHR$(27)“p0”

Turns Proportional Mode OFF.

CHR$(27)“p1”

Turns Proportional Mode ON.

Character Weight

CHR$(27)“E”

CHR$(27) “F”

CHR$(27)“G”

CHR$(27)“H”

Turns Emphasized Mode ON.

Turns Emphasized Mode OFF.

Turns Double-Strike Mode ON.

Turns Double-Strike Mode OFF.

283

Summary of Contents for FX-80

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands